Model No.: 134
Certification: ISO, AISI, ASTM, JIS, Other, DIN, API, GB, BS, DOT
Productivity: 0.5KG - 10 KG
Place of Origin: China Ningbo
Gear or chain systems are also used to connect the crankshaft to the camshaft at the correct timing. However, gears and shafts constrain the relative location of the crankshaft and camshafts. Even where the crankshaft and camshaft (s) are very close together, as in pushrod engines, most engine designers use a short chain drive rather than a direct gear drive. This is because gear drives suffer from frequent torque reversal as the cam profiles "kick back" against the drive from the crank, leading to excessive noise and wear. Fiber or nylon covered gears, with more resilience, are often used instead of steel gears where direct drive is used. Commercial engines and aircraft engines use steel gears only, as a fiber or nylon coated gear can fail suddenly and without warning.
A belt or chain allows much more flexibility in the relative locations of the crankshaft and camshafts.
Ningbo Jinyao Machinery Company. LTD
Contact Person: Alex Micheal
Address: no.226 Tianshan Road Beilun District ,Ningbo,Zhejiang